The webs top source for New Security Cameras, Surveillance Systems, and Hi-Def IP Systems

Call 855.340.9999
For tech support or general inquiries: customerservice@nellyssecurity.com
For sales questions or sales inquiries: sales@nellyssecurity.com
Nelly's Surplus, Video Survellance Systems - Install, Claremore, OK
Call 855.340.9999
For tech support or general inquiries: customerservice@nellyssecurity.com
For sales questions or sales inquiries: sales@nellyssecurity.com
customerservice@nellyssecurity.com

DVR Accessories

4 Item(s)

Set Descending Direction
per page

List  Grid 

  • EYEsurv ES-DCAL Door Magnet Alarm Input Device
    1 Year Warranty

    EYEsurv ES-DCAL Door Magnet Alarm Input Device

    • (1) ES-DCAL Door Magnet Alarm Input Device
    • Connects to alarm inputs on EYEsurv DVR's/Hybrids/NVR's. (Not applicable for Econo series DVR's)
    • Can also be used with IP cameras
    • Once a door is opened this will trigger a recording, set off an alarm, activate a PTZ preset, notify by buzzer, etc.
    • N.C. alarm type
    • Full instructions are provided on how to connect this to our DVR's
    • Pairs great with the EYEsurv ES-STAL Alarm/Strobe/LED Device
    Learn More
  • CCTV DVR Microphone
    1 Year Warranty

    CCTV DVR Microphone

    • Allows you to record audio to your DVR
    • Picks up normal talking voice from an effective range of 10-15'. Range much longer for louder sounds.
    • 12V DC Power Required
    • Power In/Power Out design, allows you to use your cameras existing incoming 12V DC power to run the camera reducing cabling
    • RCA type female output
    • Please note that this microphone picks up all noises, it is best used in areas where there is not alot of loud ambient noises from other loud equipment such as generators, air conditioners, etc. Otherwise, the desirable noise will be washed out by the loud ambient noises.
    Learn More
  • PIR Motion Detector for EYEsurv DVR's
    1 Year Warranty

    PIR Motion Detector for EYEsurv DVR's

    • Connects to alarm inputs on EYEsurv DVR's/Hybrids/NVR's. (Not applicable for Econo series DVR's)
    • Can also be used with the IP camera ESIPMP3-1
    • Use this to get a more true motion detection trigger as opposed to using the DVR's built in Pixel based motion detection
    • Effective distance range of up to 59' and a height up to 7'
    • Adjustable Pet immunity of up to 55 Lbs.
    • Power Input 8.2-16V DC
    • N.C. alarm type output
    • Tamper output option, will send a trigger signal if  device is being tampered with
    • Adjustable sensitivity
    • Full instructions are provided on how to connect this to our DVR's
    • Keep out of direct rain and moisture
    Learn More
  • EYEsurv ES-STAL Alarm Device with Siren, Strobe, and LED Alarms
    1 Year Warranty

    EYEsurv ES-STAL Alarm Device with Siren Strobe and LED Alarms

    • This device will connect to your DVR or IP cameras Alarm outputs
    • Will work on all model DVR's/Hybrids/NVR's except the Econo Series.
    • Will also work on our IP Camera model ESIP-MP2-BX1
    • This device can be triggered by the DVR's motion detection, alarm inputs(Such as our PIR motion sensor), or can be triggered manually from the DVR
    • An excellent audio/ visual alarm alerting you that an event has occured or alerts a possible intruder that they are being watched.
    • Has 3 different alarm types: Siren, Strobe and LED. Each type can be used singly or all at once simultaneously.
    • We give you full instructions on how to hook this up.
    • Requires 12V DC power.
    Learn More

4 Item(s)

Set Descending Direction
per page

List  Grid