• Includes: (1) D5744 UB12120 12 Volt 12.0AH Sealed Lead Acid Battery
• High performance, withstanding high current output and deep cycling
• Excellent resistance to vibration, shock, chemicals and heat
• Lower self-discharge
• Exceptional leak resistance even in an upside-down position
• Reliable power for critical applications
• DOT 60 classified for easy transportation Nominal Voltage: 12 Volts
• Capacity: 12 Ah
• Approximate Weight: 8.38
• Internal Resistance (Approx.) 19m?
• Charge Method: Constant Voltage
• Cycle Use (repeating use)
• Initial Current Control Voltage: 4.2 A or smaller
• Float Use Control Voltage: 13.6 - 13.8 V
• Dimensions: 5.94" L x 3.88" W x 4" H
• Part#: D5744

• Read range of up to 10cm for proximity card
• External LED control
• External Buzzer Control
• Indoor/Outdoor operation
• Solid Epoxy potted
• Waterproof IP65
• Reverse Polarity Protection
• NOTE: Not to be used in direct sunlight

• 2 Year Warranty

• Works with HID 125 kHz compatible card readers, only
• Wiegand Output Interface
• Brass eyelet (ring)
• Contact-less
• Proximity technology
• Passive (no battery)
• Markings for Date code and ID
• Read range – Up to 3.5 inches (88 mm)

This clamshell smart card is to be used with the ZKTeco bluetooth reader, the KR500BT.

• Digital PIR motion detection
• Remote input for Parallel Door Control
• Selectable Fail Safe or Fail Secure mode
• Adjustable relay latch time
• Tamper Output 50 mA @ 30 volts DC or AC
• Single or double door use: Two “Form C” Relays, selectable NC or NO
• LED for walk-test
• Detection Range Up to 8'
• Operates with 12 to 30V AC or DC power
• RFI Immunity 30 V/m from 10MHz to 2GHz

• 1 Year Warranty

• Works with RFID 125 kHz compatible card readers
• Contact-less
• Proximity technology
• Passive (no battery)
• Markings for Date code and ID
• Read range – Up to 3.5 inches (88 mm)

• 6 ft. length.
• 18 AWG gauge.
• Cord type: VW-1.
• Operating temperature up to 105°