IP Camera & NVR Gear
-
RJ45 CAT5e Tooless Keystone Jack
- An easy way to make connection ends on CAT5e network cable for your IP cameras
- To be used in conjunction with patch cables
- No tools required.
- Easy color coded install
-
Keystone Jack and 6" Network Patch Cable Pair
- Includes (2) Toolless Keystone Jacks for CAT5e Cable and (2) 6" Network cables
- All the connectors you need to connect to your CAT5 E cable when using one IP camera
- No tools needed for these connections
-
EYEsurv ES-DCAL Door Magnet Alarm Input Device
- (1) ES-DCAL Door Magnet Alarm Input Device
- Connects to alarm inputs on EYEsurv DVR's/Hybrids/NVR's. (Not applicable for Econo series DVR's)
- Can also be used with IP cameras
- Once a door is opened this will trigger a recording, set off an alarm, activate a PTZ preset, notify by buzzer, etc.
- N.C. alarm type
- Full instructions are provided on how to connect this to our DVR's
- Pairs great with the EYEsurv ES-STAL Alarm/Strobe/LED Device
-
50' Premade CAT5e IP Camera Network Cable
- Premade connectors on each end of cable
- 50' length
- a Quick and easy way to connect your IP cameras
- White Color
- 350MHz UTP Ethernet Bare Copper
-
Sandisk 32GB MicroSD Card Hard Drive for IP Cameras
- This works perfectly with our EYEsurv IP Cameras that support MicroSD cards.
- Turn your IP Camera into an all in one surveillance system.
- This SD Card turns your camera into a camera/DVR combo.
- 32GB of total storage
-
PIR Motion Detector for EYEsurv DVR's
- Connects to alarm inputs on EYEsurv DVR's/Hybrids/NVR's. (Not applicable for Econo series DVR's)
- Can also be used with the IP camera ESIPMP3-1
- Use this to get a more true motion detection trigger as opposed to using the DVR's built in Pixel based motion detection
- Effective distance range of up to 59' and a height up to 7'
- Adjustable Pet immunity of up to 55 Lbs.
- Power Input 8.2-16V DC
- N.C. alarm type output
- Tamper output option, will send a trigger signal if device is being tampered with
- Adjustable sensitivity
- Full instructions are provided on how to connect this to our DVR's
- Keep out of direct rain and moisture
-
100' Premade CAT5e IP Camera Network Cable
- Premade connectors on each end of cable
- 100' length
- a Quick and easy way to connect your IP cameras
- White Color
- 350MHz UTP Ethernet Bare Copper
-
RJ45 + BNC Cable Connection Tester for Siamese and CAT5 connections
- A must have tool for installers
- Tests for loose connections or crossed wires
- Simple and effectively easy to use
- Works for RJ45 Connections, BNC's as well as RJ11's
- Great for IP and Analog installers.
- Requires (1) 9V Battery (not included)
- Includes Master and Remote tester to test on both ends
-
EYEsurv ES-STAL Alarm Device with Siren Strobe and LED Alarms
- This device will connect to your DVR or IP cameras Alarm outputs
- Will work on all model DVR's/Hybrids/NVR's except the Econo Series.
- Will also work on our IP Camera model ESIP-MP2-BX1
- This device can be triggered by the DVR's motion detection, alarm inputs(Such as our PIR motion sensor), or can be triggered manually from the DVR
- An excellent audio/ visual alarm alerting you that an event has occured or alerts a possible intruder that they are being watched.
- Has 3 different alarm types: Siren, Strobe and LED. Each type can be used singly or all at once simultaneously.
- We give you full instructions on how to hook this up.
- Requires 12V DC power.
-
Un-Pre-Amplified Covert, Omni-Directional Microphone - 6' 3.5mm Cord
- Powered by camera's that have mic level audio input - requires no separate power source
- Omni-directional: accepts audio signals from all directions
- 25' Pickup Pattern: offers an audio range of up to 25 feet
- Removable Connector: allows you to connect the cord directly to cameras with terminal blocks
- Small Diameter Plastic Housing: ensures a low profile design
-
Un-Pre-Amplified 1/2" Knockout Mountable Weather Resistant Microphone
- Powered by camera's that have mic level audio input - requires no separate power source
- Omni-directional 25' pickup pattern
- Weather resistant enclosure with .5" removable windscreen
- Frequency response 20-16Khz
- Mounts in a standard 1/2" electrical knock out hole
- 6' cord with 3.5mm connector
-
Wireless Wifi Adapter N300 Access Point for DVR NVR or IP Camera
- Turns any DVR, NVR or IP camera into a wireless Wifi Device!
- Will sync up with your wireless router via Wifi
- Wireless N speed up to 300Mbps makes it ideal for high bandwidth consuming or interruption sensitive applications.
- Support WPS quick Wi-Fi setup
- Wall-mountable Design
- Support 100-240V power supply
-
IPCamPower IPCP-EXT2P POE Powered 2 Port POE Extender Switch for IP Cameras
- One of the most revolutionary items to hit the IP surveillance market, this device can serve many purposes as either a POE powered unmanaged switch or as a POE extender
- POE Extender: No longer do you have to worry about 100 meter run limitations. This midspan extender will take an incoming POE signal and transfer it to even further distances.
- POE Powered 2 Port Unmanaged Switch: This device will take an incoming POE power source to be powered and act as a standard 2 Port POE switch. Has 1 port in and 2 Ports out. Useful if you want to take an incoming POE signal sent through one cable and be split out to power 2 cameras at once. Can also be used as a switch for non-POE devices as well
- This device requires no local power and does not need a receptable nearby. The only way it is powered is by the incoming POE power from your POE switch or injector.
- POE injector not included.
- Wall mountable, low profile design. Only 3.1" x 3" x 1"
-
40m HDMI Extender Over Single Cat5e/6a/7 Ethernet Cable w/ IR Control
- Simple and Cost Effective HDMI Extender
- Transmits 1080P / 60Hz up to 40m over Cate5e / Cat6a
- One-Way IR Pass Through
- Independent HDMI Equalization Adjustment Button
- HDMI 1.3b and HDCP Compliance
- Built-In Surge Protection
- Compact Size for Easy Installation
-
500 GB Surveillance Hard Drive for NVR or DVR
- 500GB Hard Drive designed to work with all of our DVR's, Hybrids, and NVR's
- Reliable High Quality build to meet the demands of 24/7 operation
- Easy Installation
-
New
1 Year Warranty
1 TB Surveillance Hard Drive for NVR or DVR
- 1000GB Hard Drive designed to work with all of our DVR's, Hybrids, and NVR's
- Reliable High Quality build to meet the demands of 24/7 operation
- Easy Installation
-
Ubiquiti Nano Station Loco M5 Wireless Access Point
- 150+ Mbps real outdoor throughput
- 10km+ range
- Intelligent POE
- 13 dBi Antenna
- Compact
- Cost effective
-
2 TB Surveillance Hard Drive for NVR or DVR
- 2000GB Hard Drive designed to work with all of our DVR's, Hybrids, and NVR's
- Reliable High Quality build to meet the demands of 24/7 operation
- Easy Installation
-
New
1 Year Warranty
3 TB Surveillance Hard Drive for NVR or DVR
- 3000GB Hard Drive designed to work with all of our DVR's, Hybrids, and NVR's
- Reliable High Quality build to meet the demands of 24/7 operation
- Easy Installation
-
Pre-Configured Pair of Ubiquiti Nano Station Loco M5 Wireless Access Points
- Pre-Configured Pair of Ubiquiti Nano Station Loco M5 Wireless Access Points
- 150+ Mbps real outdoor throughput
- 10km+ range
- Intelligent POE
- 13 dBi Antenna
- Compact
- Cost effective
-
New
1 Year Warranty
4 TB Surveillance Hard Drive for NVR or DVR
- 4000GB Hard Drive designed to work with all of our DVR's, Hybrids, and NVR's
- Reliable High Quality build to meet the demands of 24/7 operation
- Easy Installation
-
New
1 Year Warranty
6 TB Surveillance Hard Drive for NVR or DVR
- 6000GB Hard Drive designed to work with all of our DVR's, Hybrids, and NVR's
- Reliable High Quality build to meet the demands of 24/7 operation
- Easy Installation