Altronix Power Supply Charger with Eight Independent 12VDC or 24VDC Fail Safe and/or Fail Secure Outputs (AL600ACM220)
Have a question about this product? Ask our experts.
Ask a Question
Live Chat
855.340.9999
You may want this accessory for this product
60 Day Guarantee
Lifetime Tech Support
Free Ground Shipping
- Nominal 220VAC (range 198VAC - 256VAC) 50/60Hz rated @ 1.2A.
- Power supply input options:
- a) One (1) common power input for ACM8 and lock power (factory installed).
- b) Two (2) isolated power inputs - One (1) to power the ACM8 and one (1) for lock accessory power, (external power supply is required). (Current is determined by the power supply connected, not to exceed a maximum of 10A total).
- Eight (8) Access Control System trigger inputs.
- Input options:
- a) Eight (8) normally open (NO) inputs.
- b) Eight (8) open collector inputs.
- c) Any combination of the above.
- 12VDC or 24VDC @ 6A supply current.
- Eight (8) independently controlled outputs.
- Output options:
- a) Eight (8) Fail-Safe and/or Fail-Secure power outputs.
- b) Eight (8) form “C” 5A rated relay outputs.
- c) Any combination of the above.
- Eight (8) auxiliary power outputs (unswitched).
- Fuses are rated @ 3.5A.
- Filtered and electronically regulated outputs (built-in power supply).
- Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.
- Fire Alarm disconnect input options:
- a) Normally open (NO) or normally closed (NC) dry contact input.
- b) Polarity reversal input from FACP signaling circuit.
- Alarm output relay indicates that FACP input is triggered (form “C” contact rated @ 1A 28VDC).
- Short circuit and thermal overload protection.
- AC fail supervision (form “C” contact).
- Red LEDs indicate outputs are triggered (relays energized).
- Green LED indicates FACP disconnect is triggered.
- AC input and DC output LED indicators.
- Built-in charger for sealed lead acid or gel type batteries.
- Automatic switch over to stand-by battery when AC fails.
- Zero voltage drop when unit switches over to battery backup (AC failure condition).
- Battery fail and battery presence supervision (form “C” contact).
- Operating Temperature: 0ºC to 49ºC (32ºF to 120ºF).
- Storage Temperature: - 20ºC to 70ºC ( - 4ºF to 158ºF).
- Relative Humidity: 85% +/- 5%.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account.
No questions yet. Be the first to ask a question!
| Specifications | Download PDF |
|---|