POE Switches for Security Cameras

In Stock

IPCamPower IPCP-16P2G-AF2 16 Port POE Switch W/ 2 Gigabit Uplinks for IP Security Cameras

Model: IPCP-16P2G-AF2

SKU: 1570

5.0

1 review

• The IPCP-16P2G-AF2 is a business class PoE switch that was designed for IP camera systems that utilize 16 IP cameras or less.
• This switch has 16 10/100 PoE powered ports with 2 additional 10/100/1000 gigabit non-powered uplink ports.
• Provides Standard PoE 30 watts power IEEE802.3af on each of the 16 PoE ports. 200 total wattage output for the entire unit.
• Designed for most standard IP POE cameras that require 30 watts or less of power.
• Rack Mountable. Rack Ears Included
• Dimensions: 13" x 8" x 1.75"

View Features

Out of Stock

IPCamPower IPCP-8P2G-AF2 8 Port POE Plus Switch W/ 2 10/100 Uplinks for IP Security Cameras

Model: IPCP-8P2G-AF2

SKU: 1569

• The IPCP-8P2G-AF2 is a business class PoE switch that was designed for IP camera systems that utilize 8 IP cameras or less.
• This switch has 8 10/100 PoE powered ports with 2 additional 10/100 standard non-powered uplink ports.
• Has ability to push PoE-Plus 30 watts power IEEE802.3af/at per port. 130 total wattage output for the entire unit.
• High wattage POE+ output can handle any standard POE camera or even the most power hungry POE cameras such as PTZ's.
• Rack Mountable. Rack Ears Included
• Dimensions: 10.6" x 7.1" x 1.75"

View Features

In Stock

IPCamPower IPCP-MINIINJECTOR-AF Mini POE Injector Wall Wart Plug | 802.3af Full 15 watts | Designed for IP Cameras

Model: IPCP-MINIINJECTOR-AF

SKU: 1578

• POE INJECTOR IN COMPACT WALL PLUG DESIGN - Designed like a typical wall wart. Plugs directly into any USA style plug
• SMALL FOOTPRINT LOW PROFILE DESIGN - Reduce the amount of wiring and footprint that normally comes associated with other POE Injectors
• 15 WATTS OF POWER at 48V 802.3af - This will power any IP camera that accepts POE power. Most IP cameras require 15 watts or less with the exception of some PTZ's. In most circumstances, this will be more than enough power for your cameras
• POWER YOUR IP CAMERAS, IP PHONES OR ANYTHING ELSE THAT TAKES 802.3af STANDARD POE POWER - Even though this was designed for IP camera installations, you can still use it for a multitude of any other devices that take standard POE power.
• ECONOMICAL PRICE POINT WITH PROFESSIONAL PERFORMANCE - IPCamPower products are built to last. This device is no different. Its simple, cost effective, and reliable.

View Features

Out of Stock

IPCamPower IPCP-MINIINJECTOR-AT Mini POE Injector Wall Wart Plug | 802.3at Full 30 Watts | Designed for IP Cameras

Model: IPCP-MINIINJECTOR-AT

SKU: 1689

• POE INJECTOR IN COMPACT WALL PLUG DESIGN - Designed like a typical wall wart. Plugs directly into any USA style plug
• SMALL FOOTPRINT LOW PROFILE DESIGN - Reduce the amount of wiring and footprint that normally comes associated with other POE Injectors
• 30 WATTS OF POWER at 48V 802.3at - This will power any IP camera that accepts POE power. Most IP cameras require 15 watts or less with the exception of some PTZ's. In most circumstances, this will be more than enough power for your cameras
• POWER YOUR IP CAMERAS, IP PHONES OR ANYTHING ELSE THAT TAKES 802.3at STANDARD POE POWER - Even though this was designed for IP camera installations, you can still use it for a multitude of any other devices that take standard POE power.
• ECONOMICAL PRICE POINT WITH PROFESSIONAL PERFORMANCE - IPCamPower products are built to last. This device is no different. Its simple, cost effective, and reliable.

View Features

Out of Stock

IPCamPower IPCP-8P2G-EXAF 8 Port POE Network Switch for IP Security Cameras with 2 Additional 10/100 Uplink Ports

Model: IPCP-8P2G-EXAF

SKU: 1642

• 8 POE PORTS W/ 2 ADDITIONAL NON POWERED PORTS - This unmanaged POE switch is actually a 10 Port switch in total. (8) 10/100 POE Rated Ports Designed for your IP Cameras or other devices that require POE. (2) Additional Non Powered 10/100 Uplink Ports for fast and smooth transfer of all combined network traffric from your cameras to run to your NVR/Server and/or Router.
• EACH PORT CAPABLE OF PUSHING POE+ UP TO 30 WATTS PER PORT FOR POWER HUNGRY DEVICES. TOTAL POWER BUDGET IS 130 WATTS - If you have cameras or devices that require abnormally high wattage, such as a PTZ for example, this switch has the ability to push up to 30 watts (POE+ IEEE802.3af/at) per port for devices such as this. Of course it also works just fine on any device that requires lower wattage POE Power as well as the switch will only push the amount of power that the device needs.
• OPTIONAL EXTEND MODE ALLOWS FOR 800' CABLE RUNS - Traditional POE switches have a max cable run of 300' (100 meters). Turning on the optional extend toggle switch on the front allows for 800' cable run distances on each the 8 POE ports. (Please note, when extend mode is on, the throughput on each of the 8 POE port drops to 10 Mbps max) (standard mode allows for the typical 100 meter cable runs and 100 Mbps max on each of the 8 poe ports)
• FANLESS QUIET DESIGN & SMALL FOOTPRINT - Only 10.5"x7"x2" in measurement, smaller than most other 24 Port POE switches. Fanless Quiet Design. This POE switch is powerful enough to be used in commercial applications yet designed with features that make it viable for residential and small business applications as well.
• RACK MOUNTABLE WITH INCLUDED RACK EAR MOUNTS - Includes all the hardware needed to mount to your server rack. However, since the unit is so small and quiet, you can easily just use it in a desk mount scenario as well.

View Features

In Stock

IPCamPower IPCP-24P2G-EXAF 24 Port POE Network Switch for IP Security Cameras with 2 Gigabit Uplink Ports

Model: IPCP-24P2G-EXAF

SKU: 1643

• 24 POE PORTS W/ 2 ADDITIONAL NON POWERED GIGABIT RATED PORTS - This unmanaged POE switch is actually a 26 Port switch in total. (24) 10/100 POE Rated Ports Designed for your IP Cameras or other devices that require POE. (2) Additional Non Powered Gigabit Rated Uplink Ports for fast and smooth transfer of all combined network traffric from your cameras to run to your NVR/Server and/or Router.
• EACH PORT CAPABLE OF PUSHING POE+ UP TO 30 WATTS PER PORT - TOTAL POE BUDGET IS 250 WATTS FOR ENTIRE SWITCH - If you have cameras or devices that require abnormally high wattage, such as a PTZ for example, this switch has the ability to push up to 30 watts (POE+ IEEE802.3af/at) per port for devices such as this. Of course it also works just fine on any device that requires lower wattage POE Power as well as the switch will only push the amount of power that the device needs.
• OPTIONAL UNIQUE EXTEND FEATURE ON PORTS 17 THRU 24 ALLOW FOR 800' CABLE RUNS - Traditional POE switches limit out at about 300' cable runs (100 meters). Flip the toggle switch on the front of the unit and ports 17 thru 24 allow for 800' runs! (note when extend mode is on ports 17-24 drop to 10Mbps throughput) (standard mode allows for traditional 100 Mbps w/ 100 meter cable runs)
• LOW PROFILE SMALL FOOTPRINT - Only 13"x8"x1.75" in measurement, smaller than most other 24 Port POE switches. This POE switch is powerful enough to be used in commercial applications yet designed with features that make it viable for residential and small business applications as well.
• RACK MOUNTABLE WITH INCLUDED RACK EAR MOUNTS - Includes all the hardware needed to mount to your server rack. However, since the unit is so small and quiet, you can easily just use it in a desk mount scenario as well.

View Features

Out of Stock

IPCamPower 48 Port POE Network Switch W/ 3 Gigabit Uplink Ports | Designed for IP Cameras | POE+ Capable of Pushing 30 Watts per Port | 400 Watts Total Budget

Model: IPCP-48P4G-AF2

SKU: 2009

• 48 POE PORTS W/ 3 ADDITIONAL NON POWERED GIGABIT RATED PORTS - This unmanaged POE switch is actually a 51 Port switch in total. (48) 10/100 POE Rated Ports Designed for your IP Cameras or other POE Devices. (3) Additional Non Powered Gigabit Rated Uplink Ports for fast and smooth transfer of all combined network traffic from your cameras to run to your NVR/Server and/or Router.
• 3 TOTAL COMBINED GIGABIT 10/100/1000 UPLINKS - Uplink Port 1 is an Ethernet Port. Uplink Ports 2 & 3 are Ethernet/SFP FIber Combo Ports meaning you can choose to use either the Ethernet port or the Fiber Port for each of these uplinks. Note you can only use 3 uplink ports at one time.
• TOTAL POE WATTAGE BUDGET OF 400 WATTS - This is normally more than enough wattage to push atleast 48 IP cameras with a mixture of both POE+ (IEEE802.3at) and Standard POE (IEEE802.3af) devices. As long as the combined maximum wattage from all your devices does not exceed a total of 400 watts, this device works perfectly. This will be more than enough wattage to fit the majority of scenarios.
• EACH PORT CAPABLE OF PUSHING POE+ UP TO 30 WATTS PER PORT FOR POWER HUNGRY DEVICES - If you have cameras or devices that require abnormally high wattage, such as a PTZ for example, this switch has the ability to push up to 30 watts (POE+ IEEE802.3af/at) per port for devices such as this. Of course it also works just fine on any device that requires lower wattage POE Power as well as the switch will only push the amount of power that the device needs.
• RACK MOUNTABLE WITH INCLUDED RACK EAR MOUNTS - Includes all the hardware needed to mount to your server rack. However, since the unit is so small and quiet, you can easily just use it in a desk mount scenario as well. Dimensions are 17.25" x 11.5" x 1.75"

View Features

Out of Stock

IPCamPower Gigabit Rated POE Powered 2 Port Switch & Network Cat5 Cat6 Midspan Cable Range Extender Passthrough Repeater for IP Cameras (IPCP-EXT2PG)

SKU: 2098

• Can Serve 2 Purposes (or both at the same time): #1) Can be used as a POE powered 2 Port POE switch #2) Can be used to extend your network cable run past the normal 300 meter distance limitation
• Gigabit Rated 10/100/1000 on all ports for fast data transfer. POE powered 2 Port switch: Has 1 port in and 2 ports out. Takes incoming POE through the in port and will act as a 2 port unmanaged POE switch through the 2 out ports to 2 more networkable devices.
• POE and/or Network Range Extender: Allows you to run cable lengths past the tradition 300 feet restriction. Daisy chain up to 2 extenders to run upwards to 900 feet
• Requires no local power, you dont need a power source nearby the extender as its simply powered from the incoming POE power from your POE switch or injector at the beginning of the cable run. (POE injector/switch is not included)
• Wall mountable low profile design. only 4" x 4" x 1"

View Features

In Stock

IPCamPower 4 Port 802.3bt POE Network Switch W/ 2 Uplink Ports for POE Lighting and High Powered IP Cameras (IPCP-4P2G-BT1)

SKU: 3173

• AN INCREDIBLE AMOUNT OF POE POWER in such a small switch. 60 watts of POE per port with a combined budget of 250 watts total for the entire switch. Capable of pushing POE Lighting and IP PTZ's that require POE power.
• 6 PORTS TOTAL, 4 POE PORTS, 2 UPLINK PORTS - The switch has (4) 10/100 powered POE ports with 2 additional non-powered 10/100 Ports.
• SMALL LOW PROFILE DESIGN - 4.6"W x 3.5"L x 1"D The separate brick-style power supply allows for the switch itself to be small and compact. Perfect for any desktop scenario. Small enough to be used with for wall mount applications (wall mounts are included).
• DESIGNED FOR HIGH POE++ POWER LOAD - Full 802.3bt POE power. No longer do you need to use multiple single port POE++ injectors to power your high powered POE devices. Power up to 4 power-hungry POE devices with this switch.
• UNMANAGED SWITCH - This is a typical simple plug-n-play unmanaged switch.

View Features

In Stock

IPCamPower POE Combiner & Splitter for Running Two IP Cameras on One Cable (IPCP-212)

Model: IPCP-212

SKU: 3225

• Run 1 cable run to the switch for 2 cameras that are near each other.
• Includes one "sender" unit and one "receiver" unit
• Comes with three weatherproof grommets for the receiver
• Optional Bonus Use for power-hungry cameras: combine the power from two PoE ports into one cable.
• Reduces cabling labor and costs
• Simple plug n play installation. Works with all standard 802.3af/at POE switches. DOES NOT WORK ON POE NVRs. Only works on standard POE network switches.

View Features