Accessories
-
Mifare 1 Contactless Smart Card - Frequency 13.56 MHZ - No Battery Needed
- Non-Contacting IC Card (no battery needed)
- Data Transmission Speed: 106 k bits/s
- Mifare RF interface (ISO/IEC 14443 A)
- 16-bit CRC, odd even check, encoding and counting by bit
- Working Frequency: 13.56MHz
-
Metal Exit Button Aluminum Alloy Panel NO/NC
- Aluminum alloy panel with a metal button
- Current Rating: 3A @ 36VDC
- NO/NC/COM
- Dimensions: 3.39″ x 3.39″ x 1.14″
- Operating Temperature: -10°C to 55°C (14°F to 131°F)
- Operating Humidity: 0% to 95% (relative humidity)
- Weight: 0.55lbs
-
Mifare Proximity Card Reader RS485 and Wiegand Protocol - Dust and Waterproof Design - 13.56mhz Reading Frequency
- Status with LED indicator
- DIP Switch
- RS485 and Wiegand Protocol
- Reading Frequency: 13.56MHz
- Uses Mifare Proximity Card
- Reading Range: 30 to 50mm (1.18″ to 1.96″)
- Power consumption <6W
- Working Temperature: -40°C to 70°C (-40°F ~ 158°F)
- Working Humidity: 10% – 90% (Non-Condensing)
- Protection Rating: IP 64
- Dimensions: 5.2″ x 3.63″ x 0.81″
- Weight: 0.3lb
-
1 Year Warranty600lbs Electromagnetic Lock MagLock Holding Force for Access Control Single Door 12V
- Use magnetic power to lock the door, 280kgs (600lbs) holding force.
- Built-in reverse current protection device (MOV). Alluminum shell adopts high strength material, with hard anodised processing.
- Corrosion resistant. Good quality and durable to use.
- Fit for wooden door, metal door, glass door, fireproof door, etc.
- Alluminum shell adopts high strength material, with hard anodised processing.
-
1 Year WarrantyLinear Proximity Cards 25 Pack For Access Control
- Wiegand 26-bit format, Facility code 11
- Standard proximity car, Clamshell style package.
- Sold in lot of 25
-
1 Year WarrantyANSI Standard Heavy Duty Electric Strike Lock Fail Secure or Fail Safe Mode Adjustable for Access Control
- Fail Safe or Fail Secure Mode Adjustable
- Holding Force: 1000kg / 2204lb
- Designed for Metal Frame drill a hole,then install it directly
- Strike lock need work with mechanical lock or konb lock which need buy separate
-
1 Year WarrantyLinear POE Module for Linear Access Control Controller Boards
- This module allows you to power emerge boards using poe power, so no local power supply is required.
- This does not come standard on the system, so it must be purchased and installed on the board.
- This module is used to supply power only, to network the board use the standard ethernet port.
- Once the POE module is installed on the board simply connect to a POE switch or injector to power the board using Ethernet cable.
-
1 Year WarrantyLinear Proximity Card Reader 125 KHZ for Access Control
- This is a multi-protocol 125 khz card reader
- 26-37 bit Wiegand or programmable custom Wiegand output formats.
- Read Range: Up to 6 Inches
- Can be mounted mullion or single-gang Configuration.
- Red and green Led indicators.
- 5 to 16 VDC reader power.
- Operating temperature -40° F to 149° F
- Weatherproof IP67.
-
1 Year WarrantyLinear Request to Exit Button For Access Control (EZ-Rex)
- Weatherproof metal housing making this button suitable for most environments
- Switch Life Greater than 20,000,0000 operations
- Closure duration ¼ seconds typical
- Voltage: 0 to 40 VDC
- Operating Temperature -20° F to 180° F
- Easy Touch Request to Exit
-
1 Year WarrantyLinear BluePass Mobile Credential Credit Card (CTG-25)
- Credential-To-Go Card, 25 Credits
- Credential-To-Go Cards represent BluePass mobile credential credits
- Mobile Credential Management via BluePass Cloud Service allows easy distribution of credentials
- Dealer App and End-user App available for iOS and Android
-
1 Year WarrantyiLW Style Flush-Mount Weatherproof 26-bit Wiegand Access Control Keypad (SSW-iLW)
- Single-gang flush mount design
- Hardened backlit keys
- Heavy chrome plated trim ring
- Key press feedback via sounder and yellow LED
- Built-in assignable sounder
- Bi-color Red/Green LED indicates relay status
- Indoor/outdoor use
- Keypad Programmable
-
1 Year WarrantyLinear BluePass 2-in-1 Multi Tech Card and Blue Tooth Cell Phone Reader For Access Control
- BLE (Bluetooth Low Energy) Compatible.
- Bluetooth and Proximity reader combo.
- Compatible with most HID 26 to 37 bit 125 KHZ credentials.
- Tired of people losing their prox cards? Use their Cell Phones as credentials instead! No one loses their cell phone!
- RFID Proximity Wiegand based 26 to 37 bit interface/ output
- Weather proof IP65
- Voltage: +6-16 VDC at the reader. 12VDC power supply is recommended.
- Operating temperature: -40° F to 149° F
- User your smartphone as access card.
- Includes single gang style adapter plate. Can be mounted either single-gang or mullion mount configuration.
1 Year Warranty
Compare Products
You have no items to compare.
Get News & Updates!
Don't worry, we hate spam, and we will never sell your email to third parties.
Download Teamviewer
Loading...