Networking

Filter

7 Items

Sort By Set Descending Direction

Show

per page

Out of Stock

IPCamPower IPCP-4P2G-AF2 4 Port POE Switch W/ 2 10/100 Uplinks for IP Cameras

Model: IPCP-4P2G-AF2

SKU: 1536

5.0

3 reviews

The IPCP-4P2G-AF2 is a business class PoE switch that was designed for IP camera systems that utilize 4 IP cameras or less.
This switch has 4 10/100 PoE powered ports with 2 additional 10/100 non-powered uplink ports.
Provides Standard PoE 30 watts power IEEE802.3af on each of the 4 PoE ports. 65 total wattage output for the entire unit.
Designed for most standard IP POE cameras that require 30 watts or less of power
Wall Mountable. Includes Wall Mount Ears
Dimensions: 4.6" x 3.5" x 1"

1 Year Warranty

View Features

Out of Stock

$44.99

1 Year Warranty

In Stock

IPCamPower IPCP-8P2G-AF2 8 Port POE Plus Switch W/ 2 10/100 Uplinks for IP Security Cameras

Model: IPCP-8P2G-AF2

SKU: 1569

The IPCP-8P2G-AF2 is a business class PoE switch that was designed for IP camera systems that utilize 8 IP cameras or less.
This switch has 8 10/100 PoE powered ports with 2 additional 10/100 standard non-powered uplink ports.
Has ability to push PoE-Plus 30 watts power IEEE802.3af/at per port. 130 total wattage output for the entire unit.
High wattage POE+ output can handle any standard POE camera or even the most power hungry POE cameras such as PTZ's.
Rack Mountable. Rack Ears Included
Dimensions: 10.6" x 7.1" x 1.75"

1 Year Warranty

View Features

In Stock

$79.99

1 Year Warranty

Out of Stock

IPCamPower IPCP-8P2G-EXAF 8 Port POE Network Switch for IP Security Cameras with 2 Additional 10/100 Uplink Ports

Model: IPCP-8P2G-EXAF

SKU: 1642

5.0

1 review

8 POE PORTS W/ 2 ADDITIONAL NON POWERED PORTS - This unmanaged POE switch is actually a 10 Port switch in total. (8) 10/100 POE Rated Ports Designed for your IP Cameras or other devices that require POE. (2) Additional Non Powered 10/100 Uplink Ports for fast and smooth transfer of all combined network traffric from your cameras to run to your NVR/Server and/or Router.
EACH PORT CAPABLE OF PUSHING POE+ UP TO 30 WATTS PER PORT FOR POWER HUNGRY DEVICES. TOTAL POWER BUDGET IS 130 WATTS - If you have cameras or devices that require abnormally high wattage, such as a PTZ for example, this switch has the ability to push up to 30 watts (POE+ IEEE802.3af/at) per port for devices such as this. Of course it also works just fine on any device that requires lower wattage POE Power as well as the switch will only push the amount of power that the device needs.
OPTIONAL EXTEND MODE ALLOWS FOR 800' CABLE RUNS - Traditional POE switches have a max cable run of 300' (100 meters). Turning on the optional extend toggle switch on the front allows for 800' cable run distances on each the 8 POE ports. (Please note, when extend mode is on, the throughput on each of the 8 POE port drops to 10 Mbps max) (standard mode allows for the typical 100 meter cable runs and 100 Mbps max on each of the 8 poe ports)
FANLESS QUIET DESIGN & SMALL FOOTPRINT - Only 10.5"x7"x2" in measurement, smaller than most other 24 Port POE switches. Fanless Quiet Design. This POE switch is powerful enough to be used in commercial applications yet designed with features that make it viable for residential and small business applications as well.
RACK MOUNTABLE WITH INCLUDED RACK EAR MOUNTS - Includes all the hardware needed to mount to your server rack. However, since the unit is so small and quiet, you can easily just use it in a desk mount scenario as well.

1 Year Warranty

View Features

Out of Stock

$89.99

1 Year Warranty

In Stock

IPCamPower 4 Port 802.3bt POE Network Switch W/ 2 Uplink Ports for POE Lighting and High Powered IP Cameras (IPCP-4P2G-BT1)

Model: IPCP-4P2G-BT1

SKU: 3173

AN INCREDIBLE AMOUNT OF POE POWER in such a small switch. 90 watts of POE per port with a combined budget of 250 watts total for the entire switch. Capable of pushing POE Lighting and IP PTZ's that require POE power.
6 PORTS TOTAL, 4 POE PORTS, 2 UPLINK PORTS - The switch has (4) 10/100 powered POE ports with 2 additional non-powered 10/100 Ports.
SMALL LOW PROFILE DESIGN - 4.6"W x 3.5"L x 1"D The separate brick-style power supply allows for the switch itself to be small and compact. Perfect for any desktop scenario. Small enough to be used with for wall mount applications (wall mounts are included).
DESIGNED FOR HIGH POE++ POWER LOAD - Full 802.3bt POE power. No longer do you need to use multiple single port POE++ injectors to power your high powered POE devices. Power up to 4 power-hungry POE devices with this switch.
UNMANAGED SWITCH - This is a typical simple plug-n-play unmanaged switch.

1 Year Warranty

View Features

In Stock

$89.99

1 Year Warranty

In Stock

IPCamPower IPCP-16P2G-AF2 16 Port POE Switch W/ 2 Gigabit Uplinks for IP Security Cameras

Model: IPCP-16P2G-AF2

SKU: 1570

5.0

1 review

The IPCP-16P2G-AF2 is a business class PoE switch that was designed for IP camera systems that utilize 16 IP cameras or less.
This switch has 16 10/100 PoE powered ports with 2 additional 10/100/1000 gigabit non-powered uplink ports.
Provides Standard PoE 30 watts power IEEE802.3af on each of the 16 PoE ports. 200 total wattage output for the entire unit.
Designed for most standard IP POE cameras that require 30 watts or less of power.
Rack Mountable. Rack Ears Included
Dimensions: 13" x 8" x 1.75"

1 Year Warranty

View Features

In Stock

$149.99

1 Year Warranty

Out of Stock

IPCamPower IPCP-24P2G-AF2 24 Port POE Switch W/ 2 Gigabit Uplinks

Model: IPCP-24P2G-AF2

SKU: 1537

5.0

1 review

This unmanaged POE switch is actually a 26 Port switch in total. (24) 10/100 POE Rated Ports Designed for your IP Cameras or other devices that require POE. (2) Additional Non Powered Gigabit Rated Uplink Ports for fast and smooth transfer of all combined network traffric from your cameras to run to your NVR/Server and/or Router.
If you have cameras or devices that require abnormally high wattage, such as a PTZ for example, this switch has the ability to push up to 30 watts (POE+ IEEE802.3af/at) per port for devices such as this. Of course it also works just fine on any device that requires lower wattage POE Power as well as the switch will only push the amount of power that the device needs.
This is normally more than enough wattage to push atleast 24 IP cameras with a mixture of both POE+ (IEEE802.3at) and Standard POE (IEEE802.3af) devices. As long as the combined maximum wattage from all your devices does not exceed a total of 250 watts, this device works perfectly. This will be more than enough wattage to fit the majority of scenarios.
Only 13"x8"x1.75" in measurement, smaller than most other 24 Port POE switches. Fanless Quiet Design. This POE switch is powerful enough to be used in commercial applications yet designed with features that make it viable for residential and small business applications as well.
Includes all the hardware needed to mount to your server rack. However, since the unit is so small and quiet, you can easily just use it in a desk mount scenario as well.

1 Year Warranty

View Features

Out of Stock

$168.99

1 Year Warranty

In Stock

IPCamPower IPCP-24P2G-EXAF 24 Port POE Network Switch for IP Security Cameras with 2 Gigabit Uplink Ports

Model: IPCP-24P2G-EXAF

SKU: 1643

24 POE PORTS W/ 2 ADDITIONAL NON POWERED GIGABIT RATED PORTS - This unmanaged POE switch is actually a 26 Port switch in total. (24) 10/100 POE Rated Ports Designed for your IP Cameras or other devices that require POE. (2) Additional Non Powered Gigabit Rated Uplink Ports for fast and smooth transfer of all combined network traffric from your cameras to run to your NVR/Server and/or Router.
EACH PORT CAPABLE OF PUSHING POE+ UP TO 30 WATTS PER PORT - TOTAL POE BUDGET IS 250 WATTS FOR ENTIRE SWITCH - If you have cameras or devices that require abnormally high wattage, such as a PTZ for example, this switch has the ability to push up to 30 watts (POE+ IEEE802.3af/at) per port for devices such as this. Of course it also works just fine on any device that requires lower wattage POE Power as well as the switch will only push the amount of power that the device needs.
OPTIONAL UNIQUE EXTEND FEATURE ON PORTS 17 THRU 24 ALLOW FOR 800' CABLE RUNS - Traditional POE switches limit out at about 300' cable runs (100 meters). Flip the toggle switch on the front of the unit and ports 17 thru 24 allow for 800' runs! (note when extend mode is on ports 17-24 drop to 10Mbps throughput) (standard mode allows for traditional 100 Mbps w/ 100 meter cable runs)
LOW PROFILE SMALL FOOTPRINT - Only 13"x8"x1.75" in measurement, smaller than most other 24 Port POE switches. This POE switch is powerful enough to be used in commercial applications yet designed with features that make it viable for residential and small business applications as well.
RACK MOUNTABLE WITH INCLUDED RACK EAR MOUNTS - Includes all the hardware needed to mount to your server rack. However, since the unit is so small and quiet, you can easily just use it in a desk mount scenario as well.

1 Year Warranty

View Features

In Stock

$189.99

1 Year Warranty

Filter

7 Items

Sort By Set Descending Direction

Show

per page

R-Series Products

The R Series is our economical and easy to use video surveillance line. These products are designed to be simple and effective and has all the basic features and ease of installation and use that the majority of users will need. These products are perfect for residential and small business installations of 32 cameras or less. Due to having some of the best prices on the web and designed to be easy to use, you can't go wrong with the R series. These products come with a 1 year warranty.

Q: Do the R series and H Series work together?
A: For the most part, yes! There are some exceptions that we would like you to consider though:

For standard non-specialty cameras such as typical domes, bullets, and turrets, the cross compatibility between brands will work fine. If you currently have a H Series NVR with a few H Series cameras connected and you want to add a few R Series cameras to your NVR or vice-versa. No problem! Setting up the cameras will be a little different when crossing brands but ultimately it will work.

However, if you are buying a system for the first time, it is recommended that you stay with the same brand for the sole purpose of the setup being more simple. If you stick with the same brand camera and NVR, setup is usually plug-n-play. While you can mix brands, you have to take some extra configuration steps to make them work together.

Also, if you are buying a specialty camera such as a PTZ, Fisheye, LPR camera, etc, we recommend that your camera brand be the same brand as your recorder for full feature use and compatibility issues.

H-Series Products

The H Series is our original and long running video surveillance line. These products are packed with features that would please a power user, yet simple enough to operate for a novice. These products are recommended for all installation types such as home, business, and enterprise. With a wide array of product types to choose, you are sure to find a product that meets your needs. These products come with a 3 year warranty.

Q: Do the R series and H Series work together?
A: For the most part, yes! There are some exceptions that we would like you to consider though:

Shop By

Now Shopping by

Brand IPCamPower Remove This Item

Clear All

Shopping Options

Brandable

No 7 item

NDAA Compliant

No 7 item

Price

$0.00 - $99.99 4 item
$100.00 and above 3 item

Shop by Brand

Shop by Brand

Shop by Brand

Networking

IPCamPower IPCP-4P2G-AF2 4 Port POE Switch W/ 2 10/100 Uplinks for IP Cameras

IPCamPower IPCP-8P2G-AF2 8 Port POE Plus Switch W/ 2 10/100 Uplinks for IP Security Cameras

IPCamPower IPCP-8P2G-EXAF 8 Port POE Network Switch for IP Security Cameras with 2 Additional 10/100 Uplink Ports

IPCamPower 4 Port 802.3bt POE Network Switch W/ 2 Uplink Ports for POE Lighting and High Powered IP Cameras (IPCP-4P2G-BT1)

IPCamPower IPCP-16P2G-AF2 16 Port POE Switch W/ 2 Gigabit Uplinks for IP Security Cameras

IPCamPower IPCP-24P2G-AF2 24 Port POE Switch W/ 2 Gigabit Uplinks

IPCamPower IPCP-24P2G-EXAF 24 Port POE Network Switch for IP Security Cameras with 2 Gigabit Uplink Ports