ZKTeco Multi-Technology HID Proximity Card Reader with Single-Gang Wall Box Mount (KR503H)
You may want this accessory for this product
Need an upgrade? Consider this product
2 Year Warranty
60 Day Guarantee
Lifetime Tech Support
Free Ground Shipping
ZKTecos' KR503H proximity card reader is ideal for any access control scenario where you are limited to a narrow mounting surface where a standard proximity card reader would be too large and bulky. This particular model can be mounted on flat surfaces or on single-gang wall boxes.
When it comes to compatibility, the KR503H has a built-in Wiegand-Out port which can be connected to almost any access control panel (including ZKAccess C3 and InBio door controllers). It's capable of reading both HID and ZKAccess 125 kHz 26-bit proximity cards.
With an IP67 weatherproof rating and tamper-resistant technology, you can rest assured that your proximity card reader is built to last. Check out the specs below to learn more!
Proximity Card Reader
This proximity card reader is capable of reading both HID and ZKAccess 125 kHz 26-bit proximity cards.
This reader's built-in Wiegand-Out port allows the reader to be used with most Access Control systems, including ZKAccess C3 and InBio door controllers.
Single Gang Wall Box Mount
You have a couple of options when it comes to mounting surfaces. You can mount this on a flat surface, such as a wall. But you can also mount this directly to a single gang wall box.
IP67 Weatherproof Rating
This card reader has an Ingress Protection (IP) rating of 67. This means the proximity reader is completely protected from dust and other solid particles. It can also withstand being submerged in 3 feet of water for up to 30 minutes.
Rest assured that when you install your reader outside, it will have no problem withstanding the elements.
|Supported Card Types
|HID 125 kHz (also ZKAccess)
|Metal or plastic US single-gang wall box, as well as flat surfaces
|Indoor & Outdoor Installation
|Electronics sealed in weather- and tamper-resistant epoxy potting
|Built-in keypad functionality
|Red, green, amber, and off (represents 4 states)
|5 to 16V DC
|IP Weatherproof Rating
|-35° F to 149° F / -40° C to + 65° C
|20% - 80%
|4.6 x 3 x .6 inches (117 x 76 x 10 mm)
|FCC, ICC, CE, C-Tick, ETL Listed
|35 mA typical, 75 mA peak @ 12V DC
|Up to 7 inches (178 mm)
|24 AWG minimum, multi-conductor stranded with an overall foil shield