• Works with RFID 125 kHz compatible card readers
• Wiegand Output Interface
• Brass eyelet (ring)
• Contact-less
• Proximity technology
• Passive (no battery)
• Markings for Date code and ID
• Read range – Up to 3.5 inches (88 mm)

• IP65-rated vandal-proof metallic enclosure
• Standard ZK 125 kHz 26-bit card reader.
• Relay outputs for electric lock and alarm
• Auxiliary inputs for door status sensor and exit switch

• 2 Year Warranty

• Provides Fast, Simple Door Egress
• Connects to Any 12V Controller
• IP68 Weatherproof Casing
• Normally Open / Normally Close / Common Relay Output

• 2 Year Warranty

• FBI PIV and Mobile ID certification; FAP20
• Selectable 500, 750, or 1000 dpi output image
• Large image capture area: .6 inches x .8 inches
• Durable glass touch surface
• Rejects spoof fingerprints
• Fast capture. 12 fps frame rate
• USB2.0 High Speed
• Multicolor (white, green, red) LED bar for status indication.
• Compact size
• Sealed against water and dust. IP64 rating
• Ambient light rejection. Sunlight operation
• Low Power Idle Mode
• -20º to 55ºC operating temperature range

• Control access to a single door over an IP network
• 30,000 card capacity and 100,000 event log capacity
• Full range of supported card readers
• Advanced access control functions built directly into the panel
• Seamless integration with third-party systems
• Free SDK available
• Licensing required
• UL 294 Certified

• (1) C3-100 Access Control Panel
• (1) Locking Metal Case
• (1) Diode for Lock (FR107)
• (2) Keys for Metal Case
• (1) DC12V/3A Power Supply

• Control access to up to four doors over an IP network
• 30,000 card capacity and 100,000 event log capacity
• Full range of supported card readers
• Advanced access control functions built directly into the panel
• Seamless integration with third-party systems
• Free SDK available
• Licensing & certification required

• (1) C3-400 Access Control Panel
• (1) Locking Metal Case
• (1) Diode for Lock (FR107)
• (2) Keys for Metal Case
• (1) DC12V/3A Power Supply

These L and Z mounting brackets are compatible with this 1200lbs Electromagnetic Lock.

• Powerful electric strike suitable for wooden, metal, or PVC doors
• Holding strength: 770lbs (350kg)
• Dual modes: fail safe (locked with power) and fail secure (unlocked with power)
• Voltage: 12 VDC

• Narrow construction for installation on surfaces with limited space
• Mount on a flat surface or a single-gang wall box
• Wiegand-out port for compatibility with most Access Control panels
• Supported card types include HID & ZKAccess 125 kHz proximity cards
• IP67 weatherproof and tamper-proof

• 2 Year Warranty