• IP65 waterproof
• Dynamic QR code with Zkey
• QR code, PDF417, Data Matrix, MicroPDF417, Aztec

An L and Z bracket for the VISIONIS 600lbs electromagnetic lock.

• 18 AWG cable with six conductors
• FPLP/CL3P OR e(UL) CMP
• 1000 foot easy pull box
• Ideal for access control applications

• Input 115VAC, 60Hz, 3.5A.
• Input fuse rated @ 3.5A/250V.
• 12VDC or 24VDC selectable output.
• 12VDC @ 4A or 24VDC @ 3A supply current.
• Four (4) Class 2 Rated fuse protected power limited outputs.
• Outputs are rated @ 3.5A.
• Filtered and electronically regulated outputs.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails.
• AC fail supervision (form “C” contacts).
• Notification trigger is selectable for 30 seconds (factory set) or 6 hours.
• Low battery supervision (form “C” contacts).
• Battery presence supervision (form “C” contacts).
• Visual Indicators
• AC input and DC output LED indicators.
• Operating Temperature: 0° C to 49° C (32° F to 120° F).
• Storage Temperature: - 20° C to 70°C ( - 4° F to 158° F).
• Relative Humidity 85% +/- 5%.
• System AC input VA requirement: 166.75VA.

• Nominal 220VAC (range 198VAC - 256VAC) 50/60Hz rated @ 1.2A.
• Power supply input options:
  • a) One (1) common power input for ACM8 and lock power (factory installed).
  • b) Two (2) isolated power inputs - One (1) to power the ACM8 and one (1) for lock accessory power, (external power supply is required). (Current is determined by the power supply connected, not to exceed a maximum of 10A total).
• Eight (8) Access Control System trigger inputs.
• Input options:
  • a) Eight (8) normally open (NO) inputs.
  • b) Eight (8) open collector inputs.
  • c) Any combination of the above.
• 12VDC or 24VDC @ 6A supply current.
• Eight (8) independently controlled outputs.
• Output options:
  • a) Eight (8) Fail-Safe and/or Fail-Secure power outputs.
  • b) Eight (8) form “C” 5A rated relay outputs.
  • c) Any combination of the above.
• Eight (8) auxiliary power outputs (unswitched).
• Fuses are rated @ 3.5A.
• Filtered and electronically regulated outputs (built-in power supply).
• Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.
• Fire Alarm disconnect input options:
  • a) Normally open (NO) or normally closed (NC) dry contact input.
  • b) Polarity reversal input from FACP signaling circuit.
• Alarm output relay indicates that FACP input is triggered (form “C” contact rated @ 1A 28VDC).
• Short circuit and thermal overload protection.
• AC fail supervision (form “C” contact).
• Red LEDs indicate outputs are triggered (relays energized).
• Green LED indicates FACP disconnect is triggered.
• AC input and DC output LED indicators.
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails.
• Zero voltage drop when unit switches over to battery backup (AC failure condition).
• Battery fail and battery presence supervision (form “C” contact).
• Operating Temperature: 0ºC to 49ºC (32ºF to 120ºF).
• Storage Temperature: - 20ºC to 70ºC ( - 4ºF to 158ºF).
• Relative Humidity: 85% +/- 5%.

• Environment: Indoor
• 1 button, for pairing
• Plastic casing
• Dimensions: 31x56x24mm
• Fits in standard installation boxes
• Relay Out: 1
• RS485: 1
• Input: 1
• Indicator: 2
• Power In: 1, 12V/100mA (Min.)
• Working Humidity: 10~90%
• Working Temperature: -20°C ~ +60°C

• 1 Year Warranty

• 120VAC Input, 60Hz, 3.5A.
• Input fuse: 5A/250V.
• Sixteen (16) fuse protected outputs.
• Outputs are rated @ 2.5A.
• 12VDC @ 10.0A supply current.
• Auxiliary Power-Limited output rated @ 1A (unswitched).
• Over Voltage Protection.
• Built-in charger for sealed lead acid or gel type batteries.
• Automatic switch over to stand-by battery when AC fails. Transfer to stand-by battery power is instantaneous with no interruption.
• AC fail supervision (form “C” contacts).
• Notification trigger is selectable for 30 seconds (factory set) or 2 hours.
• Battery fail & presence supervision (form “C” contacts).
• Low power shutdown. Shuts down DC output terminals if battery voltage drops below 71-73% (depending on the power supply). Prevents deep battery discharge.
• Supervised Fire Alarm disconnect (latching or non-latching) 10K EOL resistor. Operates on a normally open (NO) or normally closed (NC) trigger.
• Operating Temperature: 0° C to 49° C (32° F to 120° F).
• Storage Temperature: - 20° C to 70° C ( - 4° F to 158° F).
• Relative Humidity 85% +/- 5%.
• BTU/Hr (approx.): 61 BTU/Hr.
• System AC input VA requirement: 420VA.
• Green AC Power LED indicates 120VAC present.
• AC input and DC output LED indicators.
• Short circuit and overload protection.
• Unit is complete with power supply, enclosure, battery leads and cam lock.

• 12VDC/7AH Output
• For general purpose, up to 5 years in standby service or more than 260 cycles at 100% discharge
• Sealed non-spillable lead acid battery
• Highly efficient, leak-proof, and maintenance-free

• High-Security(13.56 MHz)
• Read Range 125 kHz up to 4”
• Output OSDP and Wiegand protocol
• Encryption MIFARE® DESFire® EV2
• Cable Distance Wiegand 500’ (22AWG)
• Protection Rating IP55
• Power 5 - 16V DC (Linear power supply recommended)
• Enclosure Dimensions: 1.7” x 5.1” x 0.71”

• 1-5 Year Warranty

• Single-Gang
• High-Security(13.56 MHz)
• Read Range 125 kHz up to 4”
• Output OSDP and Wiegand protocol
• Encryption MIFARE® DESFire® EV2
• Cable Distance Wiegand 500’ (22AWG)
• Protection Rating IP55
• Power 5 - 16V DC (Linear power supply recommended)
• Enclosure Dimensions: 3.25” x 5.1” x 0.71”

• 1-5 Year Warranty